What is Cantilever Rack?

Cantilever Rack is a freestanding storage unit with horizontal load carrying arms extending outward from a single vertical column. The absence of a vertical support on the outboard ends of the arms permits uninterrupted storage of long lengths of material.

Cantilever Rack is the ideal system for storing furniture, steel bars, pipe and tubing, lumber and other long, heavy items that must be kept off the floor…provides instant accessibility to one piece or a full load. Forklift easily loads off and on arms and bases. Being modular in nature, additional arms, uprights and braces may be added as storage requirements change.

Cantilever Rack is comprised of three components:
1. Uprights
2. Arms
3. Brace Sets
These components must be ordered in the appropriate quantities and capacities.

Uprights consist of a vertical column and a horizontal base which is bolted to the column. A minimum of two uprights must be ordered to form a storage bay. Each edge of the column is punched vertically on 3″ centers so it may be used as a single or double sided upright depending on the size of base used. NOTE: The arms must never be placed on the back side of a single sided upright and base. Standard upright and base color is gray.

Holes are provided in the base to anchor the upright to the floor. Uprights must never be attached to walls, columns or other structures.

Cantilever arms are the heart of the rack system. Proper selection can make or break a successful storage plan. Most offer straight arms (generally used for storing stable loads such as lumber, steel sheets, cartons and skids) and inclined arms (for cylindrical objects or loads that tend to roll forward). Arms can be adjusted on 3″ centers up and down the upright and are available in lengths to 60″ in a variety of capacities. The hair pin keeper permits instant adjustability and is easily inserted and removed for adjustment of arm height. Lips are available on all arms. Standard arm color is gray.

Straight Arm
Straight arms up to 48″ long have a minimum pitch of 3/8″ per foot to compensate for deflection. 54″ and 60″ arms have a minimum pitch of 5/8″ per foot.

Inclined Arm
Inclined arms have a pitch of 20 degrees or approximately 4.36″ per foot.

Hair Pin Keeper

Material Flow & Conveyor Systems, Inc. carries and sells an excellent selection of cantilever racks from MECO OMAHA to Vestil to Stromberg.